Leviton Rotary Lamp Dimmer / Heater Control with 200W or 300W Offset Shaft |
(Model # L-6204)  KNOB SOLD SEPARATELY Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications and availability without prior notice. Full Range Rotary Lamp Dimmer / Heater Control with 200W or 300W Offset Shaft (Style A) is used to control the brightness of incandescent or quartz lamps.
Dimmer / Heater Control Features:
- 120V AC
- 50-60Hz
- Positive ON-OFF at extreme counterclockwise position
- Reliable solid-state circuitry, heat-dispersion protected
- Radio/TV Interference Filter
- Standard leads are Number 18 ga.
- 105 degrees C AWM-TEW plastic insulated wire, 7" long, stripped 3/4" and overtinned
- Hex nut assembled, knurl nut supplied E.I.A.Standard 1/4" flatted "D" Nylon Shaft
- UL Recognized Component E-7458
- Available Watts:
- 200W (4.3 Amps available to constant output)
- 300W (3.5 Amps available to constant output)
- Model Options:
- 2 Black Leads Turns ON LOW - Start at lowest
power and increase with clockwise rotation of knob
- 2 Black Leads Turns ON HIGH - Start at highest rating and decrease with clockwise rotation of knob
- 3 Color Coded Leads (3rd lead is
Auxiliary-function) Turn ON LOW - Start at lowest
power and increase with clockwise rotation of knob
- 3 Color Coded Leads (3rd lead is
Auxiliary-function) Turns ON HIGH - Start at highest rating and decrease with clockwise rotation of knob
| |
|
Email Page
